Kopara Trading

Diamabrush Tool for Decks-Starter Pack includes Dust Shroud

Regular price $325.00 AUD

We ship the Diamabrush Quickly Grinder not included only showing for demonstration purposes. You need your own angle grinder 115mm(10,000 RPM) with a 14m spindle or arbor that the Diamabrush Tool(the diamond disc) screws onto via the 14m to 5/8-11 adaptor. Then install the the dust shroud a simple process and you are all setup and ready to remove the most stubborn coatings from all types of flat wood surfaces.

Have a look at Video https://best2hire.com.au/videos

What you get in the Diamabrush Tool for decks and timber surfaces-Starter Pack is as listed below. This gets you going with one diamabrush Tool included to do 90 Sq. Mtrs. of paint removal. If you require to remove more then you order the Diamabrush tool only as a separate order.

Diamabrush for Decks and Timber Surfaces - Starter Pack Includes: 

 

  • 1 - Diamabrush for Decks Tool for 115mm grinder (grinder not included)
  • 1 - 5" dust shroud with edge and corner access door for attaching Vacuum
  • 1 - 14mm to 5/8 11 unc adaptor for Australian Grinders

 



 Get the fastest, most effective tool for removing stubborn coatings from wood.  If your deck has years of weathered wood, failed coatings, or discoloration, the Diamabrush™ Wood, Decks, and Weatherboard Tool can save time and money. The tool never clogs or gums up, so the project can be finished in one day without the hassle of sandpaper, chemicals, or pressure washing. 

 SIZES::4.5” 

Estimated Blade Life to 90 sq. mtrs 


 Use Diamabrush Dust Shrouds with the Hand Tools or Wood, Decks, and weatherboard Tool to get virtually dust-free performance at home or on the job site. The edge access door saves time by allowing for closer coverage to walls and corners. 


Users comments:

 I stripped a varnished 350 sq ft redwood deck in about 12 hours. The tool was fabulous. I am a 61 yr old woman with arthritic hands--I think a fit younger person could've completed the job in 8 hours or less. We are thrilled with outcome! We live in a rural area and renting a deck sander was not possible.

Judith


 Doing a great job removing the mastic from our countertops and floors. We have hardwood floors buried under decades old linoleum, foam padding and groovy floral carpeting. The same linoleum was on top of wood on the kitchen counter. We removed most of the junk with a scraping blade and we were pulling our hair out trying too figure out how to get the rest of the crud off of our wood when we came across a video for the Diamabrush products. We have a dust shroud covering up the grinder wheel to vacuum all the dust up and so far it's working great, our floors and counters are looking good as new.

Linsabeth


 Worked great. We had a painted deck and tried power washing and multiple strippers. This is the only thing that actually worked to get the wood to where it can be stained.

stang95us


 This tool is a lifesaver!!!!!! I was shopping at the Bethesda store, and ran into the Behr Paint Rep who recommended this tool. I was skeptical that this tool would work, but I was desperate and took a chance on it anyway based on his advice. I rented a hand grinder from the Home Depot Tool Rental Center and was able to remove about 300 square feet of the deck coating in a little over 2 hours. This tool absolutely shredded the deck coating and also smoothed out the wood where it was splintering. It left the deck perfectly clean & smooth for me to re-coat it. I paid for the tool and the grinder rental 4 hours. I saved over $1000 based on the last contractor's quote!! This was the best value I have ever acheived on a home improvement project. 

 

Most relevant reviews

See all 6 reviews

 

  • by krakh23 Jul, 2019Works like a champ
    This product works just as promised. I put Behr deck over on my deck and followed all directions. It started peeling and I decided I would rather just stain the deck instead. I tried belt sanders, paint removers and several other tools and this tool was the ONLY one that worked as promised. It takes the paint off and leaves a good clean finish. I would definitely tell someone to use this product and its a good value!!!
  • by wonderrobyn25 Jun, 2018Really worth it
    This disc got that nasty "Rustoleum Restore" off our 8x16' back deck in only a few hours! We did not use this tool for the front deck and it took my husband WEEKS of stripping, sanding and flipping boards. In the end we had to paint the front deck instead of stain it because he could not get the wood to bare in all spots and we didn't want to rebuild the entire deck. Rustoleum paid us $350 in a class action law suit and it did not cover 1/5 of what we paid to put the stuff on and then take it off 3 or 4 years later. This tool did the work in about 3 hours, cost $50 (plus you need an angle grinder) and took the wood to bare so it can now be stained instead of painted. 
  • by carbuff89727 Jun, 2018Diamabrush works!
    This stripped the paint off my 100 year old 36' by 10' front porch easily. It still has life left in it. I made sure no nails were showing and even found a few while using it. Make sure you wear eye and respiratory protection cause stuff goes flying everywhere. The website says to use the dust sheild but I was outside and not worried about the dust. I'm glad I found this attachment.
  • by cspelio26 Sep, 2018Timesaver!
    This made removing the Behr Deckover from my deck easy. It's actually the only thing that worked

 

Included in Purchase

1 Diamabrush for decks and timber 

1 Shroud for dust collection

1 Adaptor to convert angle grinder from 14mm to 5/8 11 UNC for Australian Angle Grinders




Life is too short to live without the Diamabrush Tool for Decks-Starter Pack includes Dust Shroud. Be happy. Be Content. Be Satisfied.

Inventory Last Updated: Jun 18, 2024

More from this collection

Click to edit the product in Ali Orders.
Note: only show for shop owner